EXO3 - Multiparameter probe
EXO3 – Multiparameter probe, new generation
Get product information here:
High-performance system to monitor water quality under harsh operating conditions. Continuous water quality monitoring of natural waters, including estuaries and oceans.
- Four sensor ports plus one port for a central wiper or optional fifth sensor
- Impact-resistant sensorbody for high pressures and depths up to 250 m
- Intelligent, welded sensors in titanium casing with connection monitoring
- Improved accuracy of conductivity and temperature sensors
- Improved energy management
- Wireless communication
- Wet-pluggable connections
- Fast and easy calibration
- Built indiagnostic functions
- Records up to 60 days
- Predefined probe with preinstalled sensors allows readiness for use in the field
| Multiparameter Probe EXO 3 | |
| Ports: | 4 sensor ports ; free provable 1 central port for the wiper 1 power and communication port |
| Size | |
| Diameter: | 7,62 cm |
| Length: | 58,6 cm |
| Weight: | 2.00 kg with a full payload of 4 probes, 1 wiper, and probe guard installed |
| Probe-specifications | |
| Operating temperature: | -5...50°C |
| Storage temperature: | -20...80°C |
| Relative humidity: | 5%...95% non-condensing |
| Depth measurement: | 0...250 m |
| Communication: | Bluetooth wireless-technology, half-duplex RS-485 (USB + RS232 + USB optional) SDI12 data transmission |
| Batterie-Lebensdauer: | 90 days* |
| Datenspeicher: | 512 MB total storage; > 1.000.000 records |
| Sensor-specification | |
| Parameter | Measuring range / (Resolution) |
| Conductivity: | 0...200 mS/cm (0,001...0,01 or. 0,1mS/cm (dep. on measuring range)) |
| Temperature: | -5...50 °C (0,001 °C) |
| pH: | 0...14 pH (0,01 pH) |
| Redox: | -999...+999 mV (0,1 mV) |
| Oxygen: | 0...500 % / 0...50 mg/l (0,1 % / 0,01 mg/l) |
| Turbidity: | 0...999 FNU (0,01 FNU) 1000...4000 FNU (0,1 FNU) |
| Chlorophyll: | 0...400 µg/l ; 0...100 RFU (0,01 µg/l / 0,01 RFU) |
| Cyanobacteria (PC/PE): | 0...100 µg/l ; 0...100 RFU (0,01 µg/l / 0,01 RFU) |
| Depth: | 0...250 m (0,1 cm) |
| fDOM: | 0...300 ppb Chininsulfat-equivalent (QSE) (0,01 ppb QSE) |
| Nitrate: | 0...2000 mg/l (0,01 mg/l) |
| Chloride: | 0...100 mg/l (0,01 mg/l) |
| Ammonium: | 0...200 mg/l (0,01 mg/l) |
* 90 days at 20 ° C and 15-minute measurement interval; effective to the following sensors: temperature / conductivity, pH / ORP, oxygen and turbidity for EXO1, temperature / conductivity, pH / ORP, oxygen fDOM, total algae and turbidity for EXO2, with an installed central wiper unit and one wiping unit per measurement interval. The battery life depends on the sensor payload.